Details
SickStack - aka, the diamond cutter..
*NEW* - enail compatible diamond knot
- 6 stacked fully welded gear for insane heat retention
- top centre has been sealed and welded as opposed to majority of knots that have an open centre column which inevitably leads to oil going down the middle and being wasted. We fixed that ;)
- diamond gear placed slightly lower than the top rim to help prevent your material overflowing out of the top and keep it inside the knot.
- Maria attached onto the neck to slow down the rate of reclaim that can enter your rig of choice
- extended bottom lip allows full functionality with any standard 20mm enail coil on the market
- can be used traditionally or with an enail
- Available in 10mm male and 14mm male
..
How to use:
1- traditional method:- heat the sickstack for atleast a minute (or when close to red hot)and let cool down for about 30-45 seconds. Place your material of choice on the gears and let the magic erupt.
2- Enail:- place coil over the barrel to rest on outer bottom lip. Turn your enail on. Due to the density, your enail may go higher than the temperature chosen and drop down to specified temp(this is caused by heat dissipating to other parts of the sickstack and is a common occurrence on most thicker bangers on an enail)
..
How to clean:
- we reccomend soaking in a bath of isopropyl alcohol / isopropanol 99% until your next use.
- dry wipe with a micro fibre cloth and allow the inner to air dry before exposing to direct heat